SHAZAM HRC65 4-Flute Alloy Coating Tungsten Steel Carbide Ball Nose Milling Cutter CNC Mechanical Machining Special Endmills - AMICE ATON
SHAZAM HRC65 4-Flute Alloy Coating Tungsten Steel Carbide Ball Nose Milling Cutter CNC Mechanical Machining Special Endmills - AMICE ATON
SHAZAM HRC65 4-Flute Alloy Coating Tungsten Steel Carbide Ball Nose Milling Cutter CNC Mechanical Machining Special Endmills - AMICE ATON
SHAZAM HRC65 4-Flute Alloy Coating Tungsten Steel Carbide Ball Nose Milling Cutter CNC Mechanical Machining Special Endmills - AMICE ATON

HRC65 4-Flute Alloy Coating Tungsten Steel Carbide Ball Nose Milling Cutter CNC Mechanical Machining Special Endmills

$2.78 $2.32
In Stock Pre order Out of stock
Shipping calculated at checkout.

dimensions: R0.5x2x50x4

R0.5x2x50x4
R0.75x3x50x4
R1.0x4x50x4
R1.25x5x50x4
R1.5x6x50x3
R1.75x7x50x4
R2x8x50x4
R2x8x75x4
R2x8x100x4
R2.5x10x50x6
R3x12x50x6
R3x12x75x6
R3x12x100x6
R4x16x60x8
R4x16x75x8
R4x16x100x8
R5x20x75x10
R5x20x100x10
R6x24x75x12
R6x24x100x12
Add to Wishlist

Guaranteed Safe Checkout

maestromasterpaypalshopify payvisa
Ask a Question
dimensions: R0.5x2x50x4, R0.75x3x50x4, R1.0x4x50x4, R1.25x5x50x4, R1.5x6x50x3, R1.75x7x50x4, R2x8x50x4, R2x8x75x4, R2x8x100x4, R2.5x10x50x6, R3x12x50x6, R3x12x75x6, R3x12x100x6, R4x16x60x8, R4x16x75x8, R4x16x100x8, R5x20x75x10, R5x20x100x10, R6x24x75x12, R6x24x100x12
SKU: SZHRC65GT2F-R0.5x02Cx4Dx50L
Availability : In Stock Pre order Out of stock
Categories: ALL
Description

Milling Cutter Instructions

What buyers need to know about tool selection operating instructions

1: Before using the tool. please measure the tool deflection. the tool deflection accuracy over 0.01mm. please correct before cutting.

2: The shorter the length of the tool extends out of the collet. the better. if the tool extends out longer. you need to reduce the speed. feed speed or cutting volume.

3: If abnormal vibration or sound occurs during cutting. reduce the speed and cutting volume until the situation improves.

4: Steel cooling by spray and air jet is preferred to improve the effect of milling cutter use. Titanium and other high temperature alloys are not recommended.



[xlmodel]-[photo]-[0000]