SHAZAM HRC65 4-Flute Alloy Coating Tungsten Steel Carbide Round Nose Milling Cutter CNC Mechanical Machining Special Endmills - AMICE ATON
SHAZAM HRC65 4-Flute Alloy Coating Tungsten Steel Carbide Round Nose Milling Cutter CNC Mechanical Machining Special Endmills - AMICE ATON
SHAZAM HRC65 4-Flute Alloy Coating Tungsten Steel Carbide Round Nose Milling Cutter CNC Mechanical Machining Special Endmills - AMICE ATON
SHAZAM HRC65 4-Flute Alloy Coating Tungsten Steel Carbide Round Nose Milling Cutter CNC Mechanical Machining Special Endmills - AMICE ATON
SHAZAM HRC65 4-Flute Alloy Coating Tungsten Steel Carbide Round Nose Milling Cutter CNC Mechanical Machining Special Endmills - AMICE ATON

HRC65 4-Flute Alloy Coating Tungsten Steel Carbide Round Nose Milling Cutter CNC Mechanical Machining Special Endmills

$2.25 $1.88
In Stock Pre order Out of stock
Shipping calculated at checkout.

dimensions: 3R0.5x8x50

3R0.5x8x50
3R1.0x8x50
4R0.5x10x50
4R1.0x10x50
4R0.5x20x75
4R1.0x20x75
4R0.5x25x100
4R1.0x25x100
5R0.5x13x50
6R0.5x15x50
6R1.0x15x50
6R0.5x20x75
6R1.0x20x75
6R0.5x30x100
6R1.0x30x100
8R0.5x20x60
8R1.0x20x60
8R0.5x25x75
8R1.0x25x75
8R0.5x35x100
8R1.0x35x100
10R0.5x25x75
10R1.0x25x75
10R0.5x40x100
10R1.0x40x100
12R0.5x30x75
12R1.0x30x75
12R0.5x45x100
12R1.0x45x100
Add to Wishlist

Guaranteed Safe Checkout

maestromasterpaypalshopify payvisa
Ask a Question
dimensions: 3R0.5x8x50, 3R1.0x8x50, 4R0.5x10x50, 4R1.0x10x50, 4R0.5x20x75, 4R1.0x20x75, 4R0.5x25x100, 4R1.0x25x100, 5R0.5x13x50, 6R0.5x15x50, 6R1.0x15x50, 6R0.5x20x75, 6R1.0x20x75, 6R0.5x30x100, 6R1.0x30x100, 8R0.5x20x60, 8R1.0x20x60, 8R0.5x25x75, 8R1.0x25x75, 8R0.5x35x100, 8R1.0x35x100, 10R0.5x25x75, 10R1.0x25x75, 10R0.5x40x100, 10R1.0x40x100, 12R0.5x30x75, 12R1.0x30x75, 12R0.5x45x100, 12R1.0x45x100
SKU: SZHRC65GT4F-3R0.5x8Cx4Dx50L
Availability : In Stock Pre order Out of stock
Categories: ALL
Description

Milling Cutter Instructions

What buyers need to know about tool selection operating instructions

1: Before using the tool. please measure the tool deflection. the tool deflection accuracy over 0.01mm. please correct before cutting.

2: The shorter the length of the tool extends out of the collet. the better. if the tool extends out longer. you need to reduce the speed. feed speed or cutting volume.

3: If abnormal vibration or sound occurs during cutting. reduce the speed and cutting volume until the situation improves.

4: Steel cooling by spray and air jet is preferred to improve the effect of milling cutter use. Titanium and other high temperature alloys are not recommended.



[xlmodel]-[photo]-[0000]